Digital Benchtop LCR Meter 1khz 10-Point List Sweep Data Logging Screen Capture
digital Benchtop LCR Meter
,Benchtop LCR Meter 1khz
,lcr meter 1khz
TH2810B+ Benchtop Type LCR Meter, 10-point List Sweep, Data Logging & Screen Capture Function
-
Graphical Display: Many LCR Meters feature graphical displays that show measurement waveforms, impedance plots, or other visual representations of the measured parameters. This visual feedback aids in data interpretation and analysis.
-
Temperature Compensation: Some LCR Meters offer temperature compensation capabilities, allowing users to account for the effects of temperature on component parameters. This ensures accurate measurements even in varying temperature conditions.
-
Features
100Hz,120Hz,1kHz,10kHz 4 typical test frequencies
4.3 inch TFT liquid crystal display, Chinese and English optional operation interface
6-digit reading resolution
Maximum test speed:12.5ms, support low frequency and high speed:TX4+3ms
10 bins sorting, test sorting is more perfect
100 sets of LCRZ instrument setting files, 10 measurements
Soft power switch
Support 110V/220V two power supply voltages
10-point list sweep, support multi-frequency test sorting
Ultra-low signal source output offset (<100V), meeting the needs of large inductor, common mode choke inductor test
Super impact protection
Power on state lock button;
Empty fixture judgment
Data logging function
Screen capture function
Interface function, timing, trigger delay, etc. are more complete
Applications
Passive components:
Evaluation of Impedance Parameters for Capacitors, Inductors,Cores, Resistors, piezoelectric devices, Transformers, Chip Components, and Network Components
Other components:
Impedance evaluation of printed circuit boards, relays,switches, cables, batteries, etc.
Specifications
| Model | TH2810B+ |
| Basic Accuracy | 0.1% |
| Test Frequency | 100Hz, 120Hz, 1kHz, 10kHz |
| Test Parameters | L, C, R, |Z|, D, Q, X, d, r, Vm, Im, % |
| V/I Monitor | Yes |
| AC Test Signal Level | 0.1Vrms, 0.3Vrms, 1Vrms |
| Signal Source Internal Resistance | 10, 100 |
| Test Terminal Configuration | 5-terminal |
| Test Speed(ms/time) | Fast: 19ms; Medium: 83ms; Slow: 333msF≤120Hz Fast: 4XT+3ms |
| Zero Clearing | Open, Short, Load |
| List Sweep | 10-point list sweep; Each scan point can be individually sorted, support multi-frequency combined test sorting; Scanning test for frequency and AC voltage |
| EquivalentCircuit | Series, Parallel |
| Range Mode | AUTO, HOLD |
| Trigger Mode | Internal, External, Manual, Bus |
| Average Times | 1-255 |
| Arithmetical Operation | Direct reading, ABS, % |
| Delay | Trigger delay, step delay: 0—60.000s, 1ms step |
| General Function | Series, parallel equivalent mode, calibration: open circuit, short circuit, range selection: automatic, manual, trigger mode: INT, MAN,EXT, BUS, keyboard lock function |
| Comparator | 10 bins sorting,BIN1-BIN9, NG, AUX; Bin count function PASS, FALL front panel LED display |
| Nonvolatile Storage | 100 sets of LCRZ instrument setting files, 10 test results |
| External USB Storage | Instrument setting file, CSV data file |
Accessary
| Standard | ||||||
| Accessories name | Model | |||||
| Fixture | TH26048A | |||||
| Short circuit | TH26010 | |||||
| Kelvin test lead with box four-terminal insulation and lock | TH26011CS | |||||
| Optional | ||||||
| Accessories name | Model | |||||
| Box patch test cable | TH26029B | |||||