20Hz-100KHz Benchtop LCR Meter Precision Instruments 4.3 Inch TFT LCD
LCR precision meter instruments
,20Hz-100KHz Benchtop LCR Meter
,precision LCR Meter
TH2830 Benchtop Type LCR Meter with 4.3 inch TFT LCD, 10mVrms-2.0Vrms, 20Hz-100KHz
-
Programmable Features: Advanced LCR Meters often come with programmable features, allowing users to automate measurement sequences, save custom test setups, and streamline repetitive testing processes.
-
Automatic Compensation: The LCR Meter may have automatic compensation features for eliminating the effects of test lead resistance or parasitic capacitance, ensuring accurate and precise measurements.
Features
Low cost, high performance, small size
4.3 inch TFT LCD Display
Soft power switch
Selectable Chinese-English operation language
Max. 100kHz test frequency
Max. 6 digit reading resolution
10mVrms-2.0Vrms programmable signal level, built-in 0 -5V/50mA bias source
DCR, 50mV-2V programmable test level, resolution 10
Ls-Rd / Lp-Rd Function (L, Rd display simultaneously) *
Highest test speed 13ms/time
Selectable 30/100 signal source impedance
V/I monitor and auto level adjustment function
Built-in comparator, 10 bins sorting and count function
File storage and firmware update through U disk
RS232, RS485, USB, HANDLER, GPIB interface
Brief Introduction
Adopting the latest technology & high density circuit design and concentrating the essence of LCR test, TH283X series is a new generation compact LCR meter of low cost and high performance. Instead of traditional mechanical power switch, it adopts software control power switch. The basic accuracy of 0.05% and good test stability can compare favourably with those high-end models. Being equipped with 4.3 inch TFT LCD Display and brand new interface system, TH283X series LCR meters possess elegant appearance and easy operation.
Also, being provided with various interfaces and good compatibility with SCPI commands, TH283X series LCR meters are convenient for constituting all kinds of test system and satisfy various kinds of demands for inspection, production and scientific research.
Specifications
| Model | TH2830 | TH2832 | |
| Display | 4.3 TFT LCD Display 480×272 | ||
| Basic accuracy | LCRZ | 0.05% | 0.05% |
| DCR | 0.10% | ||
| Test frequency | 50Hz-100kHz, Continuous | 20Hz-200kHz, Continuous | |
| AC Singal | 10mVrms - 2Vrms; 100Arms - 20mArms | ||
| Output impedance | 30, 100 | ||
| RDC Signal level | 1V | 5mV - 2V | |
| DC Bias | ------- | 0V -5V/0mA -50mA | |
| Test parameters | L, C, R, |Z|, D, Q, |Y|, G, X, d, r, RDC, Vm, Im% | ||
| Test Speed (ms) | Fast: 12.5ms; Middle: 83 ms; Slow: 167 ms | ||
| List Sweep | 201 Dots. Parameter: Frequency, AC Voltage, AC Current, DC BIAS Voltage, DC BIAS Current | ||
| Test Result Display | Measurement display 1: test status and results; measurement display 2: sorting status and results |
||
| General Function | Series, parallel equivalent mode, test cable length: 0, 1m, average: 1-255 times, calibration: open circuit, short circuit, load, ALC function(only TH2832) Range selection: automatic, manual, trigger mode: INT, MAN, EXT, BUS, trigger delay: 0-999s, keyboard lock function |
||
| Special function | L-RDC simultaneous test, soft power switch, one-key screenshot function, data recording function | ||
| Comparator function | 10 bins, BIN1BIN9, NG, AUX Bin count function PASS, FAIL LED display on front panel |
||
| Storage | Internal | 100 LCRZ instrument setting files, 201 times test results | |
| USB External | Instrument setting files , measurement result CSV files, printed screen (GIF format) | ||
Accessary
| Standard | ||||||
| Accessories name | Model | |||||
| Fixture | TH26048A | |||||
| Short circuit | TH26010 | |||||
| Kelvin test lead with box four-terminal i | ||||||