Digital Low Ohm Meter Continuity Temperature Test Accuracy 0.2°C Sampling
digital low ohm meter
,low ohm continuity tester
,Low Ohm Meter Continuity
TH2518 AC/DC Low-Ohm Meter: Temperature Test Accuracy 0.2°C, Temperature Sampling Method
-
Four-Wire Measurement Technique: Many DC Resistance Meters utilize a four-wire measurement technique, also known as Kelvin sensing or four-terminal sensing. This technique helps eliminate the effects of lead resistance and contact resistance, which can introduce errors in the measurement. By providing separate current-carrying and voltage-sensing terminals, the meter can accurately measure the resistance of small components or conductors with minimal interference.
Learn us in Youtube.
Features
4.3 inch 24-color touch LCD screen with 480272 resolution
Chinese and English optional operation interface
Up to 90-channel resistance/temperature scan tests
Support 6 units for free insertion and removal, simultaneous measurement between test units
Maximum test speed can reach 600 times / sec
Maximum resistance accuracy: 0.05%, minimum resolution: 10u
Basic temperature accuracy: 0.2 °C
The adopted test end of the scan test channel is programmable
Compatible with scanning and stand-alone measurement modes
Temperature measurement can support PT100, PT500 and analog voltage three temperature sampling methods
Temperature compensation function (TC)
One-click screen capture function
Data logging function
Automatic upgrade of instrument operating software via USB HOST
Comparison sort results of channel, board and machine-level can be output
Handler interface for online operations
Application
Components
Resistor, inductor, transformer, motor, relay, circuit solder joint,capacitor riveting point
Cables, connectors
Strand wire, connectors, switches
Material
Heat-sensitive materials (fuses, sensor for thermistors), conductive materials such as metal foil
New energy
Electric vehicle battery pack connecting bridge, battery connection resistor
Specifications
| Model | TH2518 | TH2518A |
| Measuring Parameters | DC resistance, temperature | DC resistance |
| Resistance Test Range | 10200k | |
| Basic Resistance Test Accuracy | 0.05% | |
| Resistance Range | Auto and manual (200m, 2, 20, 200, 2k, 20k, 200k) | |
| Temperature Sensor Type | PT500 platinum resistance, PT100 platinum resistance, analog voltage input Temperature test range | ------ |
| Temperature Test Range | PT100,P T500:-1099.9℃Analog:0V2V | ------ |
| Temperature Test Accuracy | PT100, PT500:0.3%*measured value0.5℃Analog:±1%Rd3mV | ------ |
| Measurement Mode | Stand-alone, scanning | |
| Scanning Channels | 15 channels/boards, and up to 6 boards and 90 channels can be inserted. The board channel is for scanning test, and it is synchronous test between the test boards. | |
| Test Terminal Selection of Test Channel | Arbitrary configuration between channels (programmable) | |
| Test Current | ≤100mA | |
| Measurement Speed | ingle board: 100 times / sec, 40 times / sec, 2 times / sec, 6 boards: 600 times / sec, 240 times / sec, 12 times / sec | |
| Temperature Compensation | √ | ------ |
| Display Results | Simultaneous display the test results of 16 channels and support page turning | |
| Short-circuit Clear Correction | Support full-scale short-circuit clearing for all channels | |
| Comparators | Comparison boundaries are set separately for each test channel | |
| Limit Mode | ABSDev,ABS,% | |
| Trigger Mode | Auto trigger, manual trigger, bus trigger, Handler trigger, foot switch trigger | |
| Test Terminal | Four-terminal test | |
| Storage | 30 sets of instrument parameters | |